Forstweg 1
14656 Brieselang, Germany
Phone: +49 33232 39915
Fax: +49 33232 39911
http://www.spl-elektronik.com
vertrieb@spl-elektronik.com
Manufacturers
Trader
Service
Company Figures
Number of employees 1-19
Sales volume 1-9 Mio US $
Export content max. 25%
Year of foundation 1994
Area of business ■Electronical Equipment / Medical Technology
■Fabrics
Company Profile
Meß- und Prüftechnik für Medizin und Industrie
S.P.L. Elektronik
Meß- und Prüftechnik für Medizin und Industrie
Ihr Ansprechpartner, wenn es um die Überprüfung von Sicherheits- und Funktionseigenschaften von medizinisch technischen Geräten geht.
Die S.P.L. Elektronik ist als mittelständisches Unternehmen Hersteller von Meß – und Prüftechnik für die Medizin und Industrie. Seit Anfang der 90er Jahre produzierten wir für die GERB Elektronik GmbH Berlin, dem zu dieser Zeit führenden Unternehmen auf dem Gebiet der Prüfgeräte für die Medizintechnik, die dort entwickelten Sicherheitstester und Funktionstester. Diese Geschäftsbereiche haben wir 1997 komplett, inklusive der Entwicklungsabteilung, von der GERB Elektronik GmbH übernommen. Durch die gesammelten Erfahrungen in Produktion und Service ist es uns gelungen, diese Produkte weiter zu pflegen und mit unseren neuentwickelten Meß– und Prüfgeräten an die hervorragende Qualität der GERB-Geräte anzuknüpfen, um damit den Anforderungen der DIN EN ISO 9001 zu entsprechen.
Die S.P.L. Elektronik bietet Ihnen für die Überprüfung der elektrischen Sicherheit und Funktionsprüfungen ein umfangreiches Angebot an Dienstleistungen und Produkten, die an unserem Standort in Brieselang, in der Nähe von Berlin, entwickelt und produziert werden.
· Sicherheitstester
Überprüfung der elektrischen Sicherheit
· Funktionstester
Funktionsprüfungen für medizinisch technische Geräte und Systeme
· Software
Prüf- und Verwaltungssoftware
· Schulungen
Durchführung von Sicherheitstechnischen Prüfungen und Meßtechnischen Kontrollen
· Kalibrierservice
Überprüfung, Wartung, Kalibrierung und Reparatur von Sicherheitstestern und Funktionstestern der GERB Elektronik GmbH und der S.P.L. Elektronik.
· Isolationsmeßgeräte
Isolationsüberwachung von Gerätekombinationen mit Trenntransformatoren
Wir freuen uns auf Ihren Besuch bei uns in Brieselang.
Product Information Product Categories Product
Information
Technical equipment management, Test houses / Certification Bodies 10 Products
Product Information of Product Category Technical equipment management, Test houses / Certification Bodies ES-300 serves as test-signal generator for ECG impulsesE 24.08.2009 The ES-300 serves as test-signal generator for ECG impulses. These ECG impulses can be used for the functional test of the signal-representation and signal-evaluation of ECG monitors. Furthermore, the extended ECG functionality can be tested over respiration-function with apnoea-alarm-control.
The execution of a signal-output can be done with the PC-Software. The results of the signal- representation can be determined, assessed and stored then.
PC software can be used for flexible output of the offered waveforms. Consequently, integration into complex test instructions and into automatic test-sequences is possible. For that reason a high-quality documentation of the signal-representation and signal-evaluation of an ECG appliance is possible.
By the as far as possible freely configurable and variable ECG signal forms a large variety of signal sequences can be brought to the output. The simulation of arrhythmic signal forms offers the possibility to test more complex devices in accordance with a standard.
The generation of the calibration impulse CAL and ANE after IEC 60601-2-51:2003 enables practical operating function-controls for manufacturers and examiners.
Electrosurgical Analyzer HF-300 24.08.2009 Description of functions:
The Electro surgical Analyser HF-300 serves to test the function of high-frequency surgical devices. In accordance with the instructions of the manufacturer of such surgical devices, the user can measure the high-frequency voltage, as well as the high-frequency output power, the high-frequency peak voltage and the high-frequency leakage current given on a load resistor. The load resistor is adjustable from 25 – 3175 Ohm in steps of 25 Ohm. The test parameters can laid down in a test instruction a can be tested automatically with a PC. This makes it possible to reduce the time for testing. In the use as multi functional test device the measured values were displayed directly. For example:
HF – voltage TRMS
HF – output power TRMS
HF – current TRMS
HF – peak voltage
Crest factor
HF – leakage current
High-frequency power:
During the measurement of power, firstly the software sets the prescribed load resistance in a range from 25 W to 3175 W. Than the high-frequency power can be sending to the HF-300 and is measured. An automatic rage switcher takes care of the optimal control of the rms-converter. The rms converter operates on a thermal conversion principle and, together with the driver module, is designed for frequencies up to 10 MHz.
High-frequency leakage current:
The high-frequency leakage current is measured through a 200 Ohm load resistor. During this test the active electrode is connected with the neutral electrode through a load resistor of 350 Ohm. Other load resistor is adjustable.
Function Tester DP-300 24.08.2009 DP-300 is a defibrillator testing system for the examination of defibrillators, external cardiac pacemakers and is useful as test generator for ELECTRO -CARDIOGRAM (ECG) functions. It can be operated with main voltage and with internal accumulators.
The defibrillator testing system can be used as stand alone device and with PC.
The DP-300 as defibrillator testing device is in use for the functional test of external monophasic and biphasic defibrillators. The delivered defibrillator energy is measured on a load resistance of 50 Ohm, furthermore the voltage curve can be displayed graphically when operating with PC.
The tests can be done in the synchronous and asynchronous mode. Synchronous mode differs between paddle synchronous and monitor synchronous defibrillators.
DP-300 as cardiac pacemaker testing device serves for the functional test of external one circuit or dual circuit cardiac pacemakers for intracardial or transthoracic stimmulation, operating with asynchronous or demand pulses. The pulse amplitude, the pulse time, the pulse frequency and the AV delay time could be measured, furthermore it is possible to determine the refractory time, the sensitivity and the demand frequency automatically with a programmable test signal.
ECG stimmulation serves for ECG impulse output to defibrillators and ECG. The pulse parameters are variable.
GM410 24.08.2009 GM-410 is a measurement and test device for testing the electrical safety of medical technical and other technical appliances. The measurements and tests correspond to the conditions of IEC 60601, VDE 0751, VDE 0701, VDE 0702 and BGV A3.
To control the GM-410 a 100% compatible IBM computer with industrial standards is needed. The communication between the PC and the GM 410 follows through the RS-232 serial interface and/or USB interface. Control can be make available among other things for the software such as
- ACTIMED
- vFM
- MtData
With GM-410 the following tests are realized:
- line voltage measurement
- output current measurement
- output power measurement
- leakage current measurement
- equivalent leakage current measurement
- earth conductor resitance measurement
- isolation resistance measurent
- differential current measurement
The measured values of the leakage current measurements are calculated automatically, according to the respective standard, to the norma-tive demanded value of the line voltage.
With the GM-410 the separate measurement of the equal and the alternate current values (ac/dc measurement, TRMS) of the patient leakage current and patient auxiliary current can be accomplished according to the requirements of the standards.
It is possible to do single measurings with the equipment or let run off automatic tests.
All connectors for the test object are easily accessible on the front panel of the equipment.
HF-Analyzer HF-400 24.08.2009 Description of functions:
HF-400 serves to test the function of electrosurgery units. In accordance to the instructions of the manufacturer of such surgical devices, the user can measure the HF output power and the HF leakage current given on a load resistor. The load resistor is adjustable to 10 Ohm and from 25 – 6375 Ohm in steps of 25 Ohm. The test parameters for testing can laid down in a test instruction and can be tested automatically with a PC. This makes it possible to reduce the time for testing. In the use as multi functional test device the measured values were displayed directly. For example:
HF output power
HF leakage current
HF output power:
During the measurement of power, firstly the software sets the prescribed load resistance to 10 Ohm or from 25 Ohm to 6375 Ohm in 25 Ohm steps. Than the HF output power can be send to the HF-400 and is measured. An automatic range switcher takes care of the optimal control of the RMS-converter. The RMS converter based on a thermal conversion principle and, together with the driver module, is designed for frequencies up to 10 MHz.
HF leakage current:
The high-frequency leakage current is measured through a 200 Ohm load resistor. During this test load resistor is adjustable.
Infusion Pump Tester IN-300 24.08.2009 Description of functions:
The IN-300 serves for the functional testing of infusion pumps such as syringe pumps, roller (volumetric) pumps, peristalsis (finger) pumps and the like.
The IN-300 can makes measurements at 4 pumps at the same time
The ACTIMED Testing Program can perform single-channel measurements. In such cases, this program carries out fully automatic testing of the measurement parameters, in the sequence set forth of the selected test regulation. The measured values are rated with plus (+) or minus (-), and will be stored as a test record.
The measurement parameters:
Feed rate (volumetric)
Switch-off pressure
Bolus Volume
Function of the nurse´s call contacts
Measurement principle for feed-rate measurements
Measurement of the feed-rate is based on a volumetric principle in which a 0.5 ml measuring chamber is cyclically and alternately filled and emtied. From the time required for filling the measuring chamber, the system calcultates the feed rate with a precision of ± 1% within the measuring range of 1… 1000 ml/h. The IN-300 displays a new arithmetic mean after each filling of the measuring chamber.
The duration of measurement is in accordance with the stipulations contained in the test step selected by the operator. In order to achieve the measurement precision of 1% of the measured value given above in the technical data, at least 5 ml of measurement liquid must be pumped by syringe pumps and at least 25 ml by discontinous pumps (peristalsis pumps and the like).
Switch-off pressure
The IN-300 determines the switch-off pressure by closing the entry valve, which produces artificial stenosis.
When the switch-off pressure is reached, the infusion pump triggers an alarm, and the system stops the feed of infusion liquid. Continuous measurement of the input pressure at the IN-300 enables determining the maximum pressure, which is then recorded as the switch-off pressure of the pump.
If the input pressure exceeds 2.5 bar, the system automatically opens the valves and stops the measurement.
Bolus volume
The bolus volume is defined as the volume of liquid, which leaves the infusion tube after the switch-off pressure is reached and the stenosis valve is opend. The system measures this volume immediately after the stenosis valve is opened.
Module-Box GS-X 24.08.2009 Discription of functions:
The GS-X Testing System was developed specifically for safety testing of medical equipment. The GS-X Testing System consists of a Basic Unit and various plug-in test modules which the user can purchase as required. The range of functions of these Module-Box is being continuously expanded, and presently includes functions for testing the following devices:
- Infusion pumps
- Cardiac pacemakers
- Defibrillators
- High-frequency surgical equipment
- electrical safety
- Equipment for electro-stimulation
The GS-X Testing System is a portable, universal system which is very easy connented to a PC. In connection with this external computer, it also serves for the storage and management of customer and device databases, test regulations and records of testing results.
The GS-X Module-Box
The GS-X Module-Box principially consists of a modular system and plug-in positions for up to 4 test modules.
The system automatically recognizes the test modules as they are plugged in.
ACTIMED Testing Program
ACTIMED is the testing program for the GS-X Testing System. ACTIMED is a universal software which not only controls the test modules and displays the measured values, but also offers extensive services for management of testing, customer and device databases.
ACTIMED also manages test regulations, standards and limit-value databases.
For more information on functions please consult our Data Sheet on ACTIMED.
Safety-Tester GM-300 24.08.2009 The test appliance GM-300 is a measurement system for testing the electrical safety of medical technical and other technical appliances.
The measurements and tests correspond to the IEC 601 2nd edition, VDE 0751, VDE 0701, VDE 0702, BGV A3 and other international standards.
It is also possible to test the electrical safety of typewriters, electronic tools, laboratory equipment, refrigerators, and the like, all in compliance with VDE 0701 and VDE 0702.
The GM-300 can be used as standalone or PC-controlled testing system.
As needed, your test appliance can operate in a single step modus or can test all steps automaticaly.
To control the GM-300 a 100% compatible IBM computer with industrial standards is needed. The communication between the PC and the GM�300 follows through the serial interface (RS 232).
The operation of the Safety Tester is very easy. At the front there is a cursor-controlled menu, where you can choose several different types of operation.
SpO2-Simulator POS-300 24.08.2009 Function description:
The pulse oximeter simulator serves parameters for the simulation of SpO2. It is operated over an internal accumulator. The necessary charger is includet to the delivery.
The POS-300 can be operated as stand alone equipment or with PC.
The LCD serves for the representation as menu guidance, the test steps and the measured values.
The operation of the equipment takes place cursor-controled via foil keys on the front plate. With a few YES/NO decisions the different functions of the equipment are activated.
The choice you made last is stored after switching the equipment off, so that it does not have to be selected always again.
After the choice of fewer parameters the measurements can be done and/or the pulse oximeter simulator can be used.
In the circuit analyzer operation all measurements are implemented directly and their measured values are displayed.
For the control of the pulse oximeter simulator a 100% compatible IBM computer with industrial standards is needed. The communication between PC and pulse oximeter simulator is made by the serial interface (RS-232).
Using PC test instruction the measuring parameters which can be examined can be measured fully automatic.
Testing and managing software ACTIMED 24.08.2009 ACTIMED is a Test integration- and equipment management software, which can be brought into action in medicine and industry. ACTIMED has been developed for technicians, who are responsible for the realization of testing. Hospitals as well as self-employed inspectors and companies doing tests can use ACTIMED.
ACTIMED serves for preparation, carrying out and administration of test-runs with test instruments of S.P.L., GERB and other producers.
ACTIMED is based on GMEP and ACTIMED 1.0. Customer- and instrument administration as well as a programme for self-made forms are integrated components of ACTIMED.The stored data is presented in clearly arranged tables.This data can be sorted and filtered in alphabetical or numbered order (descending/ascending).For treatment of tables an input mask in file card size is accessible.A file card called “MEMO” is integrated in some dialogs. This memo can be seen as a notebook, in which the most important information can be imported.An ODBC-database intersection allows ACTIMED on the client-side access to professional database servers, for example the database InterBase.
Contact Persons Department/ Name Contact / e-Mail
Vertrieb / Marketing Horst Lawrenz vertrieb@spl-elektronik.com
